Blow Room Functions

spinning spun-yarn yarn Blow room is the starting of the spinning operation where the fibre is opened, cleaned, mixed , micro dust removed and evened thus passed to carding machine without increasing fibre rupture, fibre neps , broken seed particles and without removing more good fibres. The basic functions of blow room are opening, cleaning, dust removal, blending and evenly feeding the material on the card.

Hemp

fiber Hemp belongs to the Angiosperm phylum since it has vessel elements in the woody core (xylem) like hardwood.

Pattern Making

apparel apparel-making The appearance and fit of a garment is highly dependent on each process. Patternmaking is one of the earliest steps in the development of a garment. It is a craft that has evolved over the centuries into a skilled technical process. Today, patternmaking tools have been carefully tailored to quickly perform repetitive time-consuming tasks, allowing apparel companies to cater to the fast paced world of fashion. Nowaydays sophisticated software programs are used for pattern making.

Shedding machines

fabric weaving The angle which is formed by the raising threads with the threads remaining in low position is called shed. The shed must be as wide open as to permit the easy passage of the weft insertion element. The shed can be obtained by either moving the heald frames or by directly moving the heald frames through. The machines used to form the shed are cam machines, dobbies and Jacquard machines.

Emergency Plans and Equipments

apparel Emergency tools are required and important for all factories. Garment factories that care about the health and safety of their workers invest money on emergency equipment to ensure the safety of workers. Crucial emergency elements are alarms,evacuation plans, emergency lights and gathering areas.

Dyeing Methods

dyeing finishing weaving Dyeing can be performed using continuous or batch processes. Yarn dyeing is used to create interesting checks, stripes, and plaids with different-coloured yarns in the weaving process. Substances which cause these changes are called dyestuffs.

Woven Fabrics

fabric weaving Woven fabrics are made by using two or more sets of yarn interlaced at right angles to each other. Much variety is produced by weaving.

Prominance of Twill Weaves

fabric weaving An important factor that influences the prominence of twill is the direction of twist in the yarn. When the direction of yarn twist is same as the twill direction, the prominence is reduced and when the direction of the the yarn twist is opposite to the twill direction, the prominence of the twill is increased. In other words a Z twill with Z twist yarn or an S twill with S twist yarn shows less prominence.

Construction Marking of fabric

apparel apparel-making After cutting, there are several pattern markings that help us put the project together accurately. Not all markings will be found on every project, as some are specific to a particular construction technique. Some construction markings need to be transferred to the fabric so they will be visible for placement and sewing; others, like seamlines, small arrows, etc. do not need to be transferred, only heeded during assembly. Check the pattern directions for more specific marking needs.

Blended Fiber Analysis

fiber Blended yarns usually offer the best of several worlds - the breathability of wool or cotton, the durability of acrylic or nylon. Blends take dye differently and offer different color effects as well.Fiber blending has has for a long time been practiced in textile processing. By mixing fibers of different types to form textile yarns , many advantages are achieved, such as property compensation or reinforcement between fibers, cost reduction without significant sacrifice of yarn performance by pa