The emphasis on productivity and quality has developed the weaving technology very much and as a result the working hours required to weave fabric from loom have been reduced from about 20 to 0.25 during the last 125 years, and in the last 50 years there has been a reduction of 95% in operative hours per standard unit produced.
The input of roving frame is silver that comes from draw frame section where only parallel of
comber sliver. In roving section reduce the linear density of draw frame silver by drafting. After
reducing the linear density the silver is transfer into roving (a thin form of rope). This is first
stage where twist is inserted for making a yarn in spinning mill. The output of this section is
roving which is wind on a bobbin and this is suitable for further process. Here in this section
In order to achieve perfect garment costing, one must know about all the activities including purchase of fabrics, sewing, packing, transport, overheads, etc and also about their costs, procedures, advantages and risk factor. There are two types of garments, namely woven and knitted garments. Shirt, trouser, sarees, bed spreads, blankets, towels and made ups are woven. T-shirts, sweaters, undergarments, pyjamas and socks are knits.Costing is the deciding factor for fixing of prices and the impor
Description-The standards specified are minimum standards, and provide guidelines for apparel construction and performance to achieve consumer satisfaction.This knowledge will be helpful for buyers, suppliers and Agents.The standards objective is to deliver quality merchandise to the customer. It applies to all categories of apparel and textiles.
Carded Slivers are fed into the Draw-Frame and are stretched/Straightened and made in to a single sliver. Also fibre blending can be done at this stage. The cans that contain the sliver are placed along the draw-frame feeder rack, usually including eight pairs of cylinders (each pair is above the space occupied by a can),the lower cylinder is commanded positively, while the upper one rests on the lower one in order to ensure movement of the relative sliver that runs between the two.
Textile products used for clothing is broadly termed as Apparel or Garments. Garment making is one of the basic content of fashion designing. Proficiency in the art of sewing is an essential pre-requisite in garment making. There are Woven garments and Knitted garments. Shirts, trousers, sarees, bed spreads, blankets, towels and made ups are Woven. T-Shirts, sweatshirts, undergarments, pyjamas and socks are Knits.
Vinyl fibres are those man-made fibres spun from polymers or copolymers of substituted vinyl monomers and include vinylon, vinyl, vinylon-vinyl matrix (polychlal), saran, and polytetrafluoroethylene fibres.
Basically there are 2 techniques of cutting fabric like portable cutting,stationary cutting.With the advancement in technology there have been imporvements in fabric techniques also like Automated, Numerically Controlled cutting systems, which has Automatic blade cutting, Laser cutting,Water jet cutting,Die cutting etc.