Gester Instruments GT-A02A is a yarn testing instrument, still in its builder’s current range. Its builder lists test speed 50 ~ 1000mm/min, stroke space 800mm and pr-tension 0-150cN tension steelyard. Yarn testing instruments measure yarn and fibre properties such as evenness, imperfections, hairiness, tensile strength, elongation, count and twist, as well as fibre length and fineness.
Yarn testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Yarn test speed (evenness / hairiness)0.05–1 m/min
- Force capacity0–100 N
- Tensile (crosshead) speed—
- Yarn count range—
- Test standards—
- Gauge length50–500 mm
- Weight60 kg
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Load range | 0-3000cN | 0-5000cN | 0-100N | 0-300N | 0–100 N |
| Working pattern | Constant rate of extension (CRE principle), computer control, English LCD display, report printing. | |
| Testing range | 1%-100% of the full range | |
| Testing accuracy | ≤0.2%F·S | |
| Test speed | 50 ~ 1000mm/min | 0.05–1 m/min |
| Stroke space | 800mm | |
| Clamp distance | 50 ~ 500mm , digital setting | |
| Pr-tension | 0-150cN tension steelyard | |
| Power supply | Ac220V±10% 50Hz 0.25Kw | |
| Dimensions | 520×400×1600mm | |
| Weight | 60kg |
Read from the builder's published page: www.gester-instruments.com, on 2026-11-16.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.gester-instruments.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Gester Instruments
Other machines of this kind: Yarn testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.