ASTM
ASTM D3098 Method of Test for Finish Content of Woven Glass Fabrics, Cleaned and After-Finished with Epoxy-Functions Silane Type Finishes for Pla
Found by measuring this register against the ICS 59 catalogue, where ASTM coverage turned out to be 94% and this was one of the eleven gaps.
- Number
- ASTM D3098
- Edition
- ASTM D3098
- Status
- withdrawn
What this standard is for
What to watch for
Withdrawn by ASTM. Held because an older specification may still cite it; do not choose it for new work. ASTM revises on its own cycle and the revision is part of the designation on the document - D2255-02(2020) and D2255-02 are the same standard here. This register keys on the number, so check which revision a specification actually calls for.
Buy the official copy from ASTM
Metadata only — purchase the standard from the issuing body.
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.