A mill or garment maker outside the EU has no legal duty of its own under the REACH SVHC rules. The duties fall on the EU company that imports or sells the goods, and that company cannot meet them without figures only the supplier holds: which component of the product contains which Candidate List substance, and at what concentration in that component. That is what an “SVHC declaration” or “REACH declaration” request is asking for.
The figures to know: 0.1% by weight of each article, not of the finished garment; 253 entries on the Candidate List since 4 February 2026; 45 days for an EU retailer to answer a consumer. Being on the Candidate List bans nothing. Bans come from Annex XVII restrictions, and those do bind imported textiles.
REACH SVHC: the short version
- Article 33 makes every EU supplier of an article pass on the name of any Candidate List substance above 0.1% by weight of that article, with any information needed for safe use. There is no tonnage condition.
- Article 7(2) makes the EU producer or importer notify ECHA when the substance is also present at over one tonne a year in those articles.
- SCIP is the database to which the same EU suppliers send their Article 33(1) information, under the Waste Framework Directive, since 5 January 2021.
- The supplier outside the EU files nothing itself, but holds the composition data every one of these duties needs. Its obligation to send them comes from its contract.
- “Per article” means per component: a button, a zipper, a print that is an article in its own right. Dividing by the whole garment is the reading the Court of Justice rejected.
Who carries which duty
| Duty | Legal basis | Who carries it | When it applies | What the supplier outside the EU sends |
|---|---|---|---|---|
| Tell the customer | REACH Article 33(1) | Every “supplier of an article”: “any producer or importer of an article, distributor or other actor in the supply chain placing an article on the market” (Article 3(33)). “Import shall be deemed to be placing on the market” (Article 3(12)) | A Candidate List substance above 0.1% by weight of the article. No tonnage condition | For each article above 0.1%: the substance’s name, the article it is in, its concentration there, and any safe-use information you have |
| Answer a consumer | Article 33(2) | The same suppliers, in practice the retailer | On a consumer’s request: free of charge, within 45 days of receiving it | The same data, early enough for the retailer to answer inside 45 days |
| Notify ECHA | Articles 7(2) and 7(7) | The producer or importer of the articles | Above 0.1% by weight and over one tonne of the substance per producer or importer per year in those articles. It applies six months after the substance is listed. Not where exposure can be excluded during normal or reasonably foreseeable use, including disposal (7(3), which then requires instructions to the recipient), or where the substance is already registered for that use (7(6)) | The substance’s mass per piece and the quantities shipped to that importer, so it can count the tonne |
| Only representative | Article 8 | Optional. A producer outside the EU of an article imported into the EU “may by mutual agreement appoint” a person established in the EU to fulfil the obligations on importers under Title II, which holds Article 7. The representative must also comply with “all other obligations of importers under this Regulation” (8(2)) | The importers in that supply chain then count as downstream users (8(3)) | If you appoint one, you must tell your importers (8(3)) |
| SCIP notification | Article 9(1)(i) of the Waste Framework Directive, inserted by Directive (EU) 2018/851 | The “supplier of an article as defined in point 33 of Article 3” of REACH | The Article 33(1) information, sent to ECHA “as from 5 January 2021” | Nothing beyond the Article 33(1) data; the EU supplier files it |
No duty of your own. Read together, Articles 3(12) and 3(33) put these duties on companies that place the article on the EU market. REACH’s “producer of an article” makes or assembles it “within the Community” (Article 3(4)), and its “importer” is “established within the Community” (Article 3(11)). A factory outside the EU that sells to an EU importer is neither, and does not place anything on that market; the importer does, at import. So the factory has no duty of its own under Article 33, Article 7(2) or the SCIP provision. If your group imports through its own company in the EU, that company carries the duties. (This is our reading of the definitions; we have not found ECHA guidance that puts it in one sentence.)
Why the buyer keeps asking. In Case C-106/14, the European Commission argued that importers find it hard to obtain the information from suppliers established outside the EU. The Court answered: “Difficulties of that nature do not, however, affect the interpretation of Article 7(2)” (paragraph 68). The EU importer’s duty does not shrink because the data sits outside the EU, so the request lands on you.
An only representative does not end the requests. Article 8 hands the importers’ Title II duties, registration and notification among them, to one EU company of your choosing, and Article 8(2) adds “all other obligations of importers under this Regulation”. On our reading it still does not take the other EU companies out of Article 33, which binds every supplier of the article in the EU, distributors included, so each of them still owes the information to its own customer. SCIP stays with them too. The Directive does not use the name SCIP, which is ECHA’s name for the database it was required to set up (Article 9(2)). We could not confirm whether a supplier outside the EU can be named as the data source inside an importer’s SCIP notification.
The 0.1% rule applies to each article, not the garment
The Case C-106/14 judgment of 10 September 2015 settled how the threshold is counted in a product made of several articles. An object that meets REACH’s definition of an article “does not cease to be an article when it is assembled or joined with other objects”. It stays one as long as it keeps a special shape, surface or design that is more decisive for its function than its chemical composition, and does not become waste (paragraphs 53 and 54). The importer of a product made of more than one article must therefore determine “for each article” whether a Candidate List substance is above 0.1% by weight “of that article” (paragraph 83). The supplier’s information duty under Article 33 follows the same rule (paragraph 82), and assembly does not break the chain (paragraph 80).
ECHA’s Guidance on requirements for substances in articles (version 4.0, June 2017) applies this to textiles. From the man-made fibre stage onward, “any further processing is seen as processing of articles” (Example 17). On that reasoning, yarn, fabric and the garment are all articles. Its outdoor jacket (Example 20) is listed as eight separate article rows, from the top layer to one cord, each with its own material and weight, for the importer’s Article 33 and Article 7(2) checks.
Coatings and prints
Not every component is automatically its own article. The guidance’s Table 5 sets out how to count a substance by the way it entered the article:
- A coating counts with the article it covers. For a fully or partially coated article, the concentration is calculated over “the sum of the weight of the (uncoated) article and the weight of the dry coating (layer)” (Scenario III). A complex object coated after assembly is counted over the whole coated object; the guidance’s example is painted zipper sliders.
- A plastic article made from a mixture is counted over its own weight (Scenario I). The guidance’s examples are an injection-moulded chair and a “plastic print for a t-shirt”.
- Which applies is decided case by case. The guidance says the concentration “must always be done on a case-by-case basis”. The test is Article 3(3): did the print or coating receive a shape, surface or design that determines its function more than its chemistry does?
Worked example: one jacket, one print
The article rows and weights are those of ECHA’s jacket, 0.42 kg in all. The chest print, the substance and every figure for it are invented for this page; the substance is left unnamed because the arithmetic is the same for any Candidate List entry.
| Article | Material | Weight, g | Substance, mg | Concentration in that article | Above 0.1%? |
|---|---|---|---|---|---|
| Top layer | 100% polyester | 200 | 0 | 0 | No |
| Inner layer | 100% polyester | 50 | 0 | 0 | No |
| Insert | 91% polyester, 9% elastane | 100 | 0 | 0 | No |
| Membrane | PTFE | 25 | 0 | 0 | No |
| 3 zippers (plastic parts only) | Polyamide | 15 | 0 | 0 | No |
| 4 hook-and-loop fasteners | Polyamide | 5 | 0 | 0 | No |
| 8 buttons | Metal | 20 | 0 | 0 | No |
| 1 cord | Polyester | 5 | 0 | 0 | No |
| Chest print, a raised plastisol transfer (added for this page) | Plasticised PVC | 6 | 30 | 0.50% | Yes |
| Jacket | 426 | 30 |
The same 30 mg, divided three ways:
| Reading | Divided by | Concentration | mg/kg | Above 0.1%? | When it is right |
|---|---|---|---|---|---|
| The print is an article (Table 5, Scenario I) | The print, 6 g | 0.50% | 5,000 | Yes | When the print has a shape, surface or design of its own that decides its function |
| The print is a coating on the top layer (Scenario III) | Top layer plus dry print, 206 g | 0.0146% | 146 | No | When the print is a coating that became an integral part of the fabric |
| Diluted over the whole jacket | The jacket, 426 g | 0.0070% | 70 | No | Never: this is the reading C-106/14 rejected |
- The dilution hides a factor of 71. Spread over the jacket, the substance reads 71 times lower than in the print. A supplier who declares “below 0.1% in the garment” on that arithmetic has answered a question the law does not ask.
- The classification decides the answer. As an article, the print holds 5 times the threshold; as a coating, it is under it. Send the figures that let your buyer make either reading: the print’s weight, the weight of the panel it sits on, and the substance’s mass.
- If the print is an article, Article 33 applies from the first jacket; Article 7(2) may never. At 30 mg a jacket, this style alone would need more than 33.3 million jackets a year in one importer’s hands to pass one tonne. The Article 33 duty, and the SCIP notification that follows it, have no tonnage condition.
- Run the same print against a restriction. Had the 30 mg been one of the four phthalates in Annex XVII entry 51, the print would fail that restriction whichever SVHC reading applied: entry 51 is measured in “the plasticised material”, which includes printed designs and coatings, and 0.50% is 5 times its 0.1%.
Laboratories report in mg/kg, and 0.1% is 1,000 mg/kg. For a result close to it, the restricted substance limit calculator shows whether the result, with its measurement uncertainty, is conclusively below.
The Candidate List: 253 entries, and how it got there
ECHA’s announcement of 4 February 2026 put the Candidate List at 253 entries. Its Candidate List table, archived on 9 May 2026, still showed 253. We could not confirm whether any substance has been added since 9 May 2026, so check the current count on ECHA’s Candidate List table before relying on this figure. For scale, 155 substances were on the list on 16 June 2014 (C-106/14, paragraph 36).
| Update | Change | Entries after | Textile relevance, as reported | Source |
|---|---|---|---|---|
| 21 January 2025 | 5 added | 247 | None of the five has a reported textile use | SGS; CIRS |
| 25 June 2025 | 3 added | 250 | Reactive Brown 51, which ECHA lists as used in textile treatment products and dyes; toxic for reproduction | ECHA; SGS; Bureau Veritas |
| 5 November 2025 | 1 added, outside the usual batch | 251 | DBDPE, a brominated flame retardant of the kind used in textile back-coatings | Swedish Chemicals Agency (PRIO) |
| 4 February 2026 | 2 added | 253 | n-Hexane, whose uses ECHA lists as including coatings; and bisphenol AF (BPAF) and its salts, used as process regulators and cross-linking agents, with no reported textile use | ECHA |
The rows sourced to SGS, CIRS, Bureau Veritas and the Swedish Chemicals Agency were not checked against ECHA’s own notices for those updates. The list went from 250 to 253 in two steps, not one: the November 2025 addition was made through a separate consultation, outside the usual update. A tracker that compares only the numbered updates misses it.
Each addition matters to a supplier twice. Article 33 sets no transition period of its own, and Article 7(2) applies six months after the substance is listed (Article 7(7)). A declaration is therefore only as good as the list it was checked against.
What an SVHC declaration should contain
REACH prescribes no format. The list below follows from what Articles 7(2) and 33 require your buyer to know.
- The list it was checked against: its date and number of entries, for example “Candidate List as updated on 4 February 2026, 253 entries”. Without them, the declaration goes out of date at the next update without saying so.
- The product and its articles: the style or order number, and each component article with its material and weight, the same columns as ECHA’s jacket table.
- A statement for each article: whether any Candidate List substance is present above 0.1% by weight of that article. Of the article, not of the garment.
- Where one is: the substance’s name as listed and its EC or CAS number, the article it is in, its concentration in that article, and its mass per piece.
- Prints and coatings: their dry weight and the weight of the article they sit on, so either reading in Table 5 can be made.
- Safe-use information you hold. Article 33(1) asks for “sufficient information, available to the supplier, to allow safe use of the article including, as a minimum, the name of that substance”.
- The basis: test reports, or your own suppliers’ declarations for fabric, trims and chemicals, each with its date.
- A separate statement on restrictions, entry by entry (next section). An SVHC statement says nothing about them.
- Date and signature, and a line saying you will update it when the list changes.
What a “REACH certificate” is not
REACH has no certificate. Its operative provisions are registration (Articles 5 to 7), information in the supply chain (Article 33), authorisation (Articles 56 to 64) and restriction (Articles 67 to 73). None creates a certificate, a certifying body or a “REACH compliant” mark. A document headed “REACH certificate” is at best a bundle of the substance-by-substance statements above, and an “SVHC-free” statement can only honestly mean that no listed substance is above 0.1% in any article, against a dated list. We have not found an ECHA statement saying this in so many words; it is our reading of the Regulation’s text.
SVHC is not a restriction
REACH regulates substances in three different ways, and only one of them stops an imported textile at the border.
| Mechanism | What it does | Whom it binds | Imported finished textiles |
|---|---|---|---|
| Candidate List (Article 59) | Information duties: Articles 7(2) and 33, and SCIP | EU suppliers of articles | Information only. Listing bans nothing |
| Authorisation, Annex XIV (Articles 56 to 58) | After a substance’s sunset date, it may be placed on the market for a use, or used, only if that use is authorised, including “the incorporation of the substance into an article” | Manufacturers, importers and downstream users of the substance | Article 56 does not, by its terms, reach a finished article imported with the substance already in it. After the sunset date ECHA must consider whether the substance’s use in articles needs a restriction (Article 69(2)) |
| Restriction, Annex XVII (Articles 67 to 73) | Bans a substance, or sets conditions, “on its own, in a mixture or in an article” | Anyone who manufactures, places on the market or uses it | Bound directly (Article 67(1)). Import is placing on the market, so where the article was made is no defence |
Restrictions that reach textile supply chains
Not every limit is 0.1%. Each is measured in its own way, in the text of its entry in Annex XVII:
| Entry | Substance | Limit | Applies to | From |
|---|---|---|---|---|
| 46a | Nonylphenol ethoxylates (NPE) | 0.01% by weight of the textile article or of each part of it | Textile articles that can reasonably be expected to be washed in water. Second-hand textiles, and new ones made only from recycled textiles without NPE, are exempt | 3 February 2021 |
| 47 | Chromium VI | 3 mg/kg (0.0003%) of the total dry weight of the leather | Leather articles, and leather parts of articles, that come into contact with the skin | 1 May 2015 |
| 51 | DEHP, DBP, BBP and DIBP | 0.1% by weight of the plasticised material, alone or combined | Articles. “Plasticised material” covers PVC, polyurethanes and other polymers, and also surface coatings, finishes, decals, printed designs, adhesives, paints and inks | 7 July 2020 |
| 76 | N,N-dimethylformamide (DMF) | At 0.3% or more in the substance or mixture, only with workers’ derived no-effect levels (DNELs) in the chemical safety report and safety data sheet | The solvent, not the finished article. For polyurethane coating of textiles and polyurethane membranes from 12 December 2024; for dry and wet spinning of synthetic fibres from 12 December 2025 | 12 December 2023 (general) |
| 77 | Formaldehyde and formaldehyde-releasing substances | 0.080 mg/m³ released (0.062 mg/m³ for furniture and wood-based articles), under the entry’s test conditions | Articles in general, but not articles that entry 72 already covers, such as clothing and skin-contact textiles | 6 August 2026 |
| 79 | PFHxA, its salts and related substances | 25 ppb (PFHxA and its salts); 1,000 ppb (related substances), in homogeneous material | Textiles, leather, furs and hides in clothing and related accessories, and footwear, for the general public. Other textiles and leather from 10 October 2027 (Regulation (EU) 2024/2462) | 10 October 2026 |
Some substances are banned under the separate POPs Regulation (EU) 2019/1021 instead of REACH. Short-chain chlorinated paraffins, for example, are allowed in articles only below 0.15% by weight.
Questions suppliers ask
Do we have to file anything with ECHA ourselves?
No, unless your group imports into the EU through its own company there. Notification under Article 7(2), registration and SCIP all fall on EU companies. If you want the importers’ registration and notification duties held in one place, Article 8 lets you appoint an only representative established in the EU; you must then tell your importers.
Is fabric or yarn an article?
Yes. ECHA’s textile example treats the processing stage of man-made textile and non-woven fibres as an article, and any further processing as processing of articles (Example 17). Fabric sold to a garment maker in the EU is an article, and if a listed substance is above 0.1% in it, the company that imports it owes the garment maker the Article 33 information.
Does a substance on the Candidate List mean we cannot ship?
No. It means the EU supplier must pass on the name, and possibly notify ECHA. Within REACH, it is an Annex XVII restriction that stops a shipment; some substances are banned under the POPs Regulation instead.
How long does a declaration last?
Until the list changes. It changed four times between January 2025 and February 2026 (table above). Date every declaration against a list update and its entry count.
How this page is kept
Last verified: 3 October 2026. Built from the consolidated REACH text of 22 June 2026 (Articles 3, 7, 8, 33, 56, 67 and 69, and Annex XVII entries 46a, 47, 51, 76, 77 and 79); the consolidated Waste Framework Directive of 16 October 2025 (Article 9); the judgment in Case C-106/14 of 10 September 2015; ECHA’s guidance on substances in articles, version 4.0 of June 2017 (Examples 17 and 20, Table 5), read from an archived copy because ECHA’s site does not serve automated readers; and ECHA’s announcement of 4 February 2026 and Candidate List table of 9 May 2026, both archived. The 2025 Candidate List steps are as published by the sources named in that table. The jacket’s article rows and weights are ECHA’s; the print and every substance figure are invented. The REACH record in this site's regulation register carries the instrument. This page describes what the texts say; it is not legal advice for a particular product or shipment. Corrections are welcome through the contact page.
More on restricted substances: PFAS in textiles: limits and dates by market; Formaldehyde in textiles: limits by market.








