Benninger BEN-DIMENSA is a mercerising range used in dyeing, finishing and printing, still in its builder’s current range. It treats cotton fabric or yarn with concentrated caustic soda under tension, then stabilises and washes it, giving higher lustre, strength and dye uptake. It usually follows singeing, desizing and bleaching and comes before dyeing; ranges are either chain types, holding width on clips, or chainless types working over rollers.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, benningergroup.com. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Mercerising rangeDyeing, finishing and printingIn the builder's current range
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Working width—
- Machine speed (max.)—
- Production (max.)—
- Load per cycle (hank machines)—
- Cycle time—
- Make
BenningerSwitzerlandbenningergroup.com (the builder's website, opens in a new tab) All 10 machines from Benninger - Class
- Mercerising range
- Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-7 Noise ISO 9902-7
Read from the builder's published page: www.benningergroup.com, on 2026-08-24.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
- Noise
- ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.benningergroup.com,
- Archived copy
- snapshot, captured 2025-10-31
- Last changed
Related machines
Also from Benninger
Other machines of this kind: Mercerising range
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.