Home » Machinery specifications » Dongxing Textile DX321B-196

Dongxing Textile DX321B-196

Checked by an editor

Dongxing DX321B-196 is a raising, brushing, sueding or shearing machine used in dyeing, finishing and printing, still in its builder’s current range. Its builder lists line speed range 25m/min~60m/min, spindle gauge 196 and spindles per section 22. Raising, sueding, brushing and shearing machines change the fabric surface mechanically: raising teases out fibre ends with wire-covered rollers to form a nap, sueding abrades the surface with emery-covered rollers for a soft touch, brushing lifts or lays the fibres with bristle rollers, often after steaming, and shearing cuts pile or nap to an even height.

Raising, sueding and shearingDyeing, finishing and printingIn the builder's current range

Key specifications

Specifications incomplete: 1 of 3 key figures recorded

Standards
Safety ISO 11111-7 Noise ISO 9902-7
See it
Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-C41 (as listed by the organiser)

Specification

ParameterValue
Spindle gauge (mm) (锭距MM)196
Spindles per section (节锭数(个/节))22
Spindles per machine (standard) (台锭数(标准))176
Rotary head (mm) (回转头MM)53
Grinding wheel (磨轮)100 mesh, 150 mesh
Dust extraction unit (吸尘装置)4.0KW
Doubling package capacity (kg) (并纱卷装容量KG)3.0
Twisting count range (加捻支数范围)10S/2 and below, 40s/2 and below
Line speed range (线速度范围)25m/min~60m/min
Spindle speed (rpm) (锭速RPM)5000–8000, other
Equipment dimensions (设备尺寸)Headstock and tailstock 2.7 m; body 2.16 m × 8 sections (17.28 m); width 0.7 m; height 1.65 m

Read from the builder's published page: zjdxfj.cn, on 2026-08-31.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.

Safety
ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
Noise
ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
zjdxfj.cn,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device