CCI Tech LUTAN is a sample warper used in weaving, still in its builder’s current range. Its builder lists warping speed 400 m/min (LUTAN v2.5 Stationary Creel), working width 1900 mm (LUTAN v2.5) and flange diameter 300 mm (LUTAN v2.5). It makes short warps, often with complex colour sequences, by laying yarn from a small number of packages onto a drum according to a programmed pattern.
Sample warperWeavingIn the builder's current range
Key specifications
3 of 4 key figures recorded
- Make
- CCI TechTaiwanccitech.com.tw (the builder's website, opens in a new tab) All 6 machines from CCI Tech
- Class
- Sample warper
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-5 Noise ISO 9902-5
Specification
| Parameter | Value | Comparable | As published |
|---|---|---|---|
| Working Width | 1900 mm | LUTAN v2.5 | |
| Working Width | 2200 mm | LUTAN v3.6 | |
| Warping Length | 2.5 - 50 m | LUTAN v2.5 | |
| Warping Length | 11 – 200 m | LUTAN v3.6 | |
| Warping Length | 15 – 500 m | LUTAN v5.0 | |
| Warping Speed | 400 m/min | LUTAN v2.5 Stationary Creel | |
| Warping Speed | 2400 m/min | LUTAN v2.5 Rotatory Creel | |
| Warping Speed | 600 m/min | LUTAN v3.6 Stationary Creel | |
| Warping Speed | 7200 m/min | LUTAN v3.6 Rotatory Creel | |
| Warping Speed | 9600 m/min | LUTAN v5.0 Rotatory Creel | |
| Drum Circumference | 2.5 m | 2 500 mm | LUTAN v2.5 |
| Drum Circumference | 3.6 m | LUTAN v3.6 | |
| Drum Circumference | 5.0 m | LUTAN v5.0 | |
| Barrel Length | 2024 mm | LUTAN v2.5 | |
| Flange Diameter | 300 mm | LUTAN v2.5 | |
| Barrel Length | 2800 mm | LUTAN v3.6 | |
| Flange Diameter | 1000 mm | LUTAN v3.6 | |
| Air Consumption | 200 L/min | 12 m³/h | LUTAN v2.5 |
| Air Pressure | 5–7 kgf/cm² | LUTAN v2.5 | |
| Power Voltage | 220 V | LUTAN v2.5 | |
| Power Frequency | 50–60 Hz | LUTAN v2.5 |
Read from the builder's published page: www.ccitk.com, on 2026-10-29.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for preparatory machinery to weaving and knitting. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-5 Textile machinery — Safety requirements — Part 5: Preparatory machinery to weaving and knitting — Amendment 2
- Noise
- ISO 9902-5 Textile machinery — Noise test code — Part 5: Weaving and knitting preparatory machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.ccitk.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from CCI Tech
Other machines of this kind: Sample warper
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.