- Make
- Karl Mayer
- Class
- Warp knitting / raschel
- Process stage
- Knitting
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Working Width/ Gauge | 226 inches = 5740 mm E6/6 = 1 Needle per 25,4 mm for the production of hay bale and pallet nets E6/3 = 2 Needle per 25,4 mm for the production of tulip nets |
| Bars/ Knitting Elements | Single needle bar, knock-over comb bar and slider bar RS 2 EL-F: 2 ground guide bars, GB 1 stitch-forming |
| Fabric Take-up | Electronically controlled, 4-roller system driven by geared motor, controlled via Motion Control. |
Read from the builder's published page: www.karlmayer.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Karl Mayer
Other machines of this kind: Warp knitting / raschel
Elsewhere in Knitting
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.