- Make
- Karl Mayer
- Class
- Warp knitting / raschel
- Process stage
- Knitting
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Working Widths/ Gauges | 170", 260" E 6, E 9, E 12 |
| Bars/ Knitting Elements | Single-needle bar, knockover comb bar and slider bar, stitch comb bar, four ground guide bars, GB 1 to GB 3 stitch-forming Material Feeding Options |
| Warp Beam Support | 4 warp beam positions, free-standing, for working from sectional beams with a flange diameter of 812 mm (32 inches) |
| Feeding Devices | 2 yarn feeding device positions with 3 driven feeding rollers each, for working from a creel or from beam let-off device |
Read from the builder's published page: www.karlmayer.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Karl Mayer
Other machines of this kind: Warp knitting / raschel
Elsewhere in Knitting
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.