- Make
- Karl Mayer
- Class
- Warp knitting / raschel
- Process stage
- Knitting
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | As published |
|---|---|---|
| Working width | 130" (+4" working width extension) | Published in inches by the builder. |
| Gauge | E 32, E 36 | E-number needle gauge, needles per inch. The builder lists every gauge the machine is built in; a given machine is one of them. |
| Warp beam support | 1 x 35" / 1 x 25" (free standing) | Beam positions and flange diameter in inches. |
Read from the builder's published page: www.karlmayer.com, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Karl Mayer
Other machines of this kind: Warp knitting / raschel
Elsewhere in Knitting
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.