Karl Mayer TM 2 is a warp knitting machine, still in its builder’s current range. Its builder lists gauge E 28, E 32 and warp beam support 2 × 32" (free-standing). It forms loops from a sheet of parallel warp yarns fed from beams, with guide bars laying each yarn onto the needles so loops run lengthways.
Warp knitting / raschelKnittingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Working width4 572 mm
- Gauges available28–32 E
- Guide bars—
- Speed (max.)—
- Warp beam diameter2–813 mm
- Make
Karl MayerGermanykarlmayer.com (the builder's website, opens in a new tab) All 77 machines from Karl Mayer - Process stage
- Knitting
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-6 Noise ISO 9902-6
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H4-C27 (as listed by the organiser)
Specification
| Parameter | Value | Comparable | As published |
|---|---|---|---|
| Working width | 180" (+6" working width extension) 238" (+ 10" working width extension) 280" (+ 10" working width extension) | 4 572 mm | Published in inches by the builder. |
| Gauge | E 28, E 32 | E-number needle gauge, needles per inch. The builder lists every gauge the machine is built in; a given machine is one of them. | |
| Warp beam support | 2 × 32" (free-standing) | 2–813 mm | Beam positions and flange diameter in inches. |
Read from the builder's published page: www.karlmayer.com, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for fabric manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-6 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
- Noise
- ISO 9902-6 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.karlmayer.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Karl Mayer
Other machines of this kind: Warp knitting / raschel
Elsewhere in Knitting
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.