Home » Machinery specifications » Karl Mayer TM 3-S

Karl Mayer TM 3-S

Checked by an editor

Karl Mayer TM 3-S is a warp knitting machine, still in its builder’s current range. Its builder lists gauge E 32, E 36 and warp beam support 3 x 32". It forms loops from a sheet of parallel warp yarns fed from beams, with guide bars laying each yarn onto the needles so loops run lengthways.

Warp knitting / raschelKnittingIn the builder's current range

Key specifications

Specifications incomplete: 2 of 4 key figures recorded

Process stage
Knitting
Standards
Safety ISO 11111-6 Noise ISO 9902-6
See it
Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H4-C27 (as listed by the organiser)

Specification

ParameterValueComparableAs published
Working width130" (+2" working width extension)3 302 mmPublished in inches by the builder.
GaugeE 32, E 36E-number needle gauge, needles per inch. The builder lists every gauge the machine is built in; a given machine is one of them.
Warp beam support3 x 32"3–813 mmBeam positions and flange diameter in inches.

Read from the builder's published page: www.karlmayer.com, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for fabric manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.

Safety
ISO 11111-6 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
Noise
ISO 9902-6 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.karlmayer.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device