Kato Tech KES-FB3-A is a fabric testing instrument, still in its builder’s current range. Its builder lists minimum detectable load 10gf/cm². Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.
Fabric testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 1 of 5 key figures recorded
- Test performed—
- Measuring range—
- Test stations / specimen holders—
- Test standards—
- Specimen sizesquare, 100–200 mm a side (standard)
Specification
| Parameter | Value |
|---|---|
| Data obtained | compression stiffness, compression energy, recovery |
| Approximate dimensions (W×D×H) | main unit: 285×405×500 mm |
| Approximate weight | main unit: 40 kg |
| Power supply voltage and frequency | AC100V 50/60Hz |
| Sample size | square, 100–200 mm a side (standard) |
| Amplifier dimensions | amplifier: 230×450×500 mm |
| Amplifier weight | amplifier: 20 kg |
| Minimum detectable load | 10gf/cm² |
Read from the builder's published page: www.keskato.co.jp, on 2026-11-16.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.keskato.co.jp,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Kato Tech
Other machines of this kind: Fabric testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.