Noseda NC 06 is a fabric inspection and rolling machine used in textile testing and quality control, still in its builder’s current range. It runs fabric over a lit inspection table, or past automatic camera systems, so that defects can be marked and graded, and then rolls or folds the fabric while measuring its length. It is used after weaving or knitting, after finishing and before cutting.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.noseda1893.it. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Fabric inspection and rollingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Inspection speed (max.)—
- Working width—
- Roll diameter (max.)—
Read from the builder's published page: www.noseda1893.it, on 2026-11-05.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.noseda1893.it,
- Last changed
Related machines
Other machines of this kind: Fabric inspection and rolling
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.