Roaches International Opti-Fade is a fabric testing instrument, still in its builder’s current range. Its builder lists specimen holders 3 x, standard fading lamp 400W and accelerated fading lamp 500W. Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.
Fabric testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Test performedAccelerated light fastness
- Measuring range—
- Test stations / specimen holders3
- Test standards—
- Specimen size—
- Weight25 kg
- Make
- Roaches InternationalUnited Kingdomroaches.co.uk (the builder's website, opens in a new tab) All 34 machines from Roaches International
- Class
- Fabric testing
- Process stage
- Testing and laboratory
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Test performed | Accelerated light fastness |
| Test tubes | 50 x Type C Test Tubes (150 x 16mm) |
| Specimen holders | 3 x Type A Water Cooled Specimen Holders |
| Standard Fading Lamp | 400W |
| Accelerated Fading Lamp | 500W |
| Power Supply | 220V, 50/60Hz, Single Phase |
| Size | 470 x 450 x 450mm |
| Weight | 25kg (Inc 50 Tubes, 3 Specimen Holders & Lamps) |
Read from the builder's published page: www.roaches.co.uk, on 2026-11-16.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.roaches.co.uk,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Roaches International
Other machines of this kind: Fabric testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.