ISO 3090
Ropes and cordage — Netting yarns — Determination of change in length after immersion in water
Ropes and cordage — Netting yarns — Determination of change in length after immersion in water
ISO
ISO appears on 1,355 crosswalks here — as the issuing body, or as an equivalent to another body's standard.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 961–970 of 1,355 Show the whole register
International Organization for Standardization
The international consensus standard, and usually the one a crosswalk is filed under. Textile test methods sit in technical committee TC 38.
International Official site
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ISO 3296
Withdrawal of ISO 3296-1975
This is not a standard. It is ISO's catalogue entry recording that the standard of this number was WITHDRAWN, and the title above is that notice rather than…
ISO 3341
Textile glass — Yarns — Determination of breaking force and breaking elongation
Textile glass — Yarns — Determination of breaking force and breaking elongation
ISO 3342:2011
Textile glass -- Mats -- Determination of tensile breaking force
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 3343
Textile glass — Yarns — Determination of twist balance index
Textile glass — Yarns — Determination of twist balance index
ISO 3344:1997
Reinforcement products -- Determination of moisture content
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 3374:2000
Reinforcement products -- Mats and fabrics -- Determination of mass per unit area
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 3375:2009
Textile glass -- Determination of stiffness of rovings
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 3376
Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
ISO 3377-1
Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear
Part of a multi-part series this register already held parts of. Added to complete the sequence, because a series read in fragments describes a method without the requirements…