ISO
ISO 21420 Protective gloves — General requirements and test methods — Amendment 1
Classified under ICS 13.340.40 Hand and arm protection. Covers the finished article rather than the fibre or fabric it is made from, which is what separates this class from the textile technology standards elsewhere in this register.
- Number
- ISO 21420
- Edition
- ISO 21420:2020
- Status
- active
Equivalents
| Body | Number | Equivalence | Deviation |
|---|---|---|---|
| CEN | EN ISO 21420 | IDT | CEN adopts the standard unchanged under this designation, which is the name it is cited by across the European Union and the one a national body re-adopts as BS EN, DIN EN or NF EN. Recorded so a specification written in European terms reaches the document this register already holds. |
What this standard is for
What to watch for
Designation and title were read from a commercial catalogue rather than from the publisher, which was not reachable. The ICS subclass is recorded because it is the reason this record is here at all. An amendment has been published against this standard: EN ISO 21420:2020/A1:2024. Those are CEN amendments to the EUROPEAN adoption. Whether ISO has issued a corresponding amendment to its own text is not established here and should not be assumed from this. An unamended copy of the base document is incomplete - a laboratory working from one is following superseded requirements while holding a correctly named standard, which is exactly the failure a designation alone will not reveal.
Buy the official copy from ISO
Metadata only — purchase the standard from the issuing body.
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.