Carpet & Floor Coverings
Turns tuft density, pile height and yarn count into pile yarn consumption and face weight in both metric and imperial, reports pile density and yarn cost per square metre, and converts a BCF line output in kilograms per hour into square metres of carpet a day.
Calculator
Carpet & Floor Coverings
Synchronises wire height with pattern data on woven carpet looms: yarn taken by each surface tuft, tuft density from rows and frames, total pile yarn per square metre split into surface and buried yarn, and the wire height a finished pile height requires.
Calculator
Carpet & Floor Coverings
Converts tufting gauge and broadloom width into needle count, needle spacing in millimetres, tufts per square metre from the stitch rate, tufts inserted per minute, fabric take-off speed and area production.
Calculator
Carpet & Floor Coverings
Converts a radiant panel burn length into critical radiant flux per ASTM E648: flux in W/cm² and kW/m², margins against the Class I and Class II thresholds, the burn length Class I would require and the fraction of the specimen consumed.
Calculator
Carpet & Floor Coverings
Optimises latex backing on tufted carpet: tuft bind strength from dry coat weight, margin over the required bind, the coat weight a target bind actually needs, wet pick-up at the given solids, latex per tuft and the drying energy the water carries away.
Calculator
Carpet & Floor Coverings
Translates carpet pile height, weight and underlay into room noise metrics: estimated NRC, pile bulk density, sabins added by the carpet, reverberation time with and without it, and the resulting steady-state noise reduction in decibels.
Calculator
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
3,388 machines in the register.Tell us about a missing one 795 event series in the register.Submit a trade fair or conference 3,047 standards tracked in the register.Get the changes by email each week