Atlas Copco GA 180-315 VSD+ is a compressor used in mill utilities and handling, still in its builder’s current range. Its builder lists capacity FAD 684 - 4,183 m³/h, installed motor power 180 - 320 kW and working pressure 3.5 - 10.9 bar(g). It supplies compressed air for mill operations, including weft insertion on air-jet looms, air-jet spinning, splicing on winders and pneumatic controls throughout the plant.
CompressorUtilities and handlingIn the builder's current range
Key specifications
3 of 3 key figures recorded
Specification
| Parameter | Value | As published |
|---|---|---|
| Working Pressure | 3.5 - 10.9 bar(g) | Metric |
| Working Pressure | 0 - 0 psig | US/Imperial |
| Capacity FAD | 684 - 4,183 m³/h | Metric |
| Capacity FAD | 402.6 - 2,462 cfm | US/Imperial |
| Installed motor power | 180 - 320 kW | Metric |
| Installed motor power | 242 - 430 HP | US/Imperial |
| Capacity FAD l/s | 190 - 1,162 l/s | Metric |
| Capacity FAD l/s | 3,012 - 16,532 l/s | US/Imperial |
| Ambient temperature | 55 °C | |
| Ambient temperature | 131 °F |
Read from the builder's published page: www.atlascopco.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.atlascopco.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Atlas Copco
Elsewhere in Utilities and handling
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.