Home » Machinery specifications » Atlas Copco GA 30+-75+

Atlas Copco GA 30+-75+

Checked by an editor

Atlas Copco GA 30+-75+ is a compressor used in mill utilities and handling, still in its builder’s current range. Its builder lists capacity FAD 256 - 924 m³/h, installed motor power 30 - 75 kW and working pressure 7.5 - 13 bar(g). It supplies compressed air for mill operations, including weft insertion on air-jet looms, air-jet spinning, splicing on winders and pneumatic controls throughout the plant.

CompressorUtilities and handlingIn the builder's current range

Specification

ParameterValue
Working Pressure7.5 - 13 bar(g)
Working Pressure109 - 189 psig
Capacity FAD256 - 924 m³/h
Capacity FAD151 - 544 cfm
Installed motor power30 - 75 kW
Installed motor power40 - 100 HP
Capacity FAD71 - 257 l/s
Capacity FAD1,125 - 4,074 l/s

Read from the builder's published page: www.atlascopco.com, on 2026-10-29.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.atlascopco.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device