Atlas Copco GA 37+ - 45+ is a compressor used in mill utilities and handling, still in its builder’s current range. Its builder lists capacity FAD 88 - 150 l/s, installed motor power 37 - 45 kW and working pressure 7.5 - 13 bar(e). It supplies compressed air for mill operations, including weft insertion on air-jet looms, air-jet spinning, splicing on winders and pneumatic controls throughout the plant.
CompressorUtilities and handlingIn the builder's current range
Key specifications
Specifications incomplete: 2 of 3 key figures recorded
- Free air delivery317–540 m³/h
- Working pressure (max.)7.5–13 bar
- Ambient temperature (max.)—
- Installed power37–45 kW
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Capacity FAD | 88 - 150 l/s | 317–540 m³/h |
| Working pressure | 7.5 - 13 bar(e) | |
| Installed motor power | 37 - 45 kW | |
| Capacity FAD | 317 - 539 m³/hr |
Read from the builder's published page: www.atlascopco.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.atlascopco.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Atlas Copco
Elsewhere in Utilities and handling
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.