Dilo DI-LOOM OD is a needle punching machine used in nonwovens production, still in its builder’s current range. Its builder lists working width up to 10.000 mm and stroke frequency 3000 min -1. It bonds a fibre batt by repeatedly driving barbed needles through it, entangling the fibres mechanically into a coherent felt.
Needle punchingNonwovensIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Working width10 000 mm
- Stroke frequency (max.)3 000 rpm
- Needle density—
- Output speed (max.)—
- Make
- DiloTrades as the DILO Group: DiloSystems, DiloSpinnbau and DiloTemafa.Germanydilo.de (the builder's website, opens in a new tab) All 21 machines from Dilo
- Class
- Needle punching
- Process stage
- Nonwovens
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-3 Noise ISO 9902-3
Specification
| Parameter | Value | Comparable | As published |
|---|---|---|---|
| Working width | up to 10.000 mm (depending on the type) | 10 000 mm | Recorded as published. The site mixes conventions - 1,5 m uses a decimal comma, 1.1 m a decimal point, and 10.000 mm a thousands dot - so the marks are not normalised. This page serves more than one model of the range and the builder qualifies the figure as depending on the type, so it is the range's envelope and not this model's own number. |
| Stroke frequency | 3000 min -1 | Strokes per minute, written by the builder as min -1. This page serves more than one model of the range and the builder qualifies the figure as depending on the type, so it is the range's envelope and not this model's own number. |
Read from the builder's published page: www.dilo.de, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for nonwoven machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-3 Textile machinery — Safety requirements — Part 3: Nonwoven machinery — Amendment 2
- Noise
- ISO 9902-3 Textile machinery — Noise test code — Part 3: Nonwoven machinery — Amendment 1
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.dilo.de,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Dilo
Other machines of this kind: Needle punching
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.