Home » Machinery specifications » Dilo DI-LOOM UD

Dilo DI-LOOM UD

Dilo DI-LOOM UD is a needle punching machine used in nonwovens production, still in its builder’s current range. Its builder lists working width up to 10.000 mm and stroke frequency 3000 min -1. It bonds a fibre batt by repeatedly driving barbed needles through it, entangling the fibres mechanically into a coherent felt.

Needle punchingNonwovensIn the builder's current range

Key specifications

Specifications incomplete: 2 of 4 key figures recorded

Make
DiloTrades as the DILO Group: DiloSystems, DiloSpinnbau and DiloTemafa.Germanydilo.de (the builder's website, opens in a new tab) All 21 machines from Dilo
Process stage
Nonwovens
Standards
Safety ISO 11111-3 Noise ISO 9902-3

Specification

ParameterValueComparableAs published
Working widthup to 10.000 mm (depending on the type)10 000 mmRecorded as published. The site mixes conventions - 1,5 m uses a decimal comma, 1.1 m a decimal point, and 10.000 mm a thousands dot - so the marks are not normalised. This page serves more than one model of the range and the builder qualifies the figure as depending on the type, so it is the range's envelope and not this model's own number.
Stroke frequency3000 min -1Strokes per minute, written by the builder as min -1. This page serves more than one model of the range and the builder qualifies the figure as depending on the type, so it is the range's envelope and not this model's own number.

Read from the builder's published page: www.dilo.de, on 2026-08-26.

Standards that apply to this class

Machines of this class fall under the textile machinery standards for nonwoven machinery. The common requirements of ISO 11111-1 apply to every machine in this family.

Safety
ISO 11111-3 Textile machinery — Safety requirements — Part 3: Nonwoven machinery — Amendment 2
Noise
ISO 9902-3 Textile machinery — Noise test code — Part 3: Nonwoven machinery — Amendment 1

These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.dilo.de,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device