Home » Machinery specifications » Gester Instruments GT-C26A

Gester Instruments GT-C26A

Checked by an editor

Gester Instruments GT-C26A is a fabric testing instrument, still in its builder’s current range. Its builder lists weight 165 kg, testing range 500pa-200kpa and water pressure increase rate 1kpa-30kpa. Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.

Fabric testingTesting and laboratoryIn the builder's current range

Key specifications

Specifications incomplete: 1 of 5 key figures recorded

Specification

ParameterValue
Testing range500pa-200kpa
Water pressure increase rate1kpa-30kpa
Accuracy0.2%F.S
Clamping methodPneumatic clamping
Specimen test area100cm 2
Testing mode1) P. Rise 2) Const P & Timing 3) Const P & Time 4) Water Penetration 5) Fatigue
Testing unitKPa, PSI, mmH2O, cmH2O, mbar, mmHg
Power supplyAC 220V 50/60HZ
Weight165 kg

Read from the builder's published page: www.gester-instruments.com, on 2026-11-16.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.gester-instruments.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device