Gester Instruments GT-C46-2 is a fabric testing instrument, still in its builder’s current range. Its builder lists weight 25kg, range of thickness 0 - 10mm and test pressure 49.1kpa (393.3g). Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.
Fabric testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 1 of 5 key figures recorded
- Test performed—
- Measuring range—
- Test stations / specimen holders—
- Test standardsISO 5084, ISO 9073.2, ISO 2589, ASTM D1777
- Specimen size—
- Weight25 kg
Specification
| Parameter | Value |
|---|---|
| Standards | ISO 5084, ISO 9073.2, ISO 2589, ASTM D1777 |
| Range of Thickness | 0 - 10mm |
| Test Pressure | 0.1 kpa and 1 kpa ( 20.4g and 204g) |
| Test Pressure | 0.1kpa and 0.5kpa (25.5g and 127.6g) |
| Test Pressure | 49.1kpa (393.3g) |
| Test Pressure | 0.7kpa, 4.14kpa and 7.58kpa (46.2g,273.2g and 500.1g) |
| Test Pressure | 23.4kpa(169.2g) |
| Test Pressure | 172kpa(546.8g) |
| Test Pressure | 18.9kpa(4944.7g) |
| Pressing Duration | 5s / 10s / 30s, can be switched |
| Power Supply | AC220V ± 10% 50Hz |
| Dimension s ( L×W×H ) | 450 × 216 × 305mm |
| Weight | 25kg |
Read from the builder's published page: www.gester-instruments.com, on 2026-11-16.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.gester-instruments.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Gester Instruments
Other machines of this kind: Fabric testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.