Maruti Plastotech MT/IF-110 is a two-for-one twister used in spinning, still in its builder’s current range. It combines two or more yarns, already assembled side by side on a doubled package, into a plied yarn, inserting two turns of twist for every revolution of the spindle. It follows doubler winding and produces stronger, more even plied yarns for weaving, knitting, sewing thread and industrial uses.
Checked against the builder's page. On 2026-11-19 an automated check found this model named on the builder's page, www.marutiplastotech.com. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Two-for-one twisterSpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 5 key figures recorded
- Spindles per machine—
- Spindle gauge—
- Spindle speed (max.)—
- Yarn count range—
- Twist range—
- Make
- Maruti PlastotechIndiamarutiplastotech.com (the builder's website, opens in a new tab) All 22 machines from Maruti Plastotech
- Class
- Two-for-one twister
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
Read from the builder's published page: www.marutiplastotech.com, on 2026-11-17.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.marutiplastotech.com,
- Last changed
Related machines
Also from Maruti Plastotech
Other machines of this kind: Two-for-one twister
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.