- Make
- Andao
- Class
- Autowinder
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Take-up frame (框架 Takeup Frame) | 1 layer (source reads "two layer") |
| Winding denier (dtex) (卷绕纤度 Diner(Dtex)) | 1500-15000Dtex |
| Process speed (m/min) (工艺速度 Winding Speed(m/min)) | 100-500m/min |
| Package width (mm) (丝饼宽度 bobbin width(mm)) | 260mm (made to order) |
| Package diameter (mm) (卷装直径 bobbin dia.(mm)) | 280mm |
| Chuck diameter (mm) (夹头直径 diameter of chuck (mm)) | 100mm |
| Installed power (装机功率) | 3600W |
| Air supply requirement (instrument compressed air) (气源要求 (仪表压缩空气)) | Pressure: 0.6–0.7 MPa. Dew point: −20 °C. Condition: oil-free and free of solid particles |
| Energy consumption (设备能耗) | Air consumption: 0.02 M3/h. Power consumption: 2.15 KW/h |
| Machine weight (设备重量) | 650KG (net weight) |
Read from the builder's published page: www.andaojx.cn, on 2026-08-30.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Other machines of this kind: Autowinder
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.