The winder has an inverter-controlled chuck motor and a servo-controlled traverse cam. It uses an electronic winding ratio, and the friction roller contact pressure is set by a servo proportional valve. Winding tension is set through a proportional valve combined with a frictionless cylinder. It has two traverse strokes to choose from, a broken-yarn alarm and an automatic suction device. The builder says it suits winding and rewinding of high-performance fibres such as aramid, polyarylate, polyimide, UHMWPE and PBO.
AutowinderSpinningIn the builder's current range
Key specifications
3 of 4 key figures recorded
- Class
- Autowinder
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-B04 (as listed by the organiser)
Specification
| Parameter | Value | Unit | Comparable |
|---|---|---|---|
| Model | SW320SG/300/600 | ||
| Control mode | Inverter + servo system | ||
| Take-up frame | Single layer | ||
| Winding yarn linear density | 150-15000 | Dtex | |
| Winding speed | 100-500 | m/min | |
| Winding ratio control | Electronic | ||
| Bobbin width | 190/250/300 | mm | |
| Max. bobbin diameter | 280 | mm | |
| Tube inner diameter | 75/94 | mm | |
| Tube length | 220/290/320 | mm | |
| Voltage requirement | 380V ± 5% 3-phase, 4-wire | ||
| Installed power | 1250 | W | 1.25 kW |
| Compressed air pressure | 0.5 ~ 0.6 | MPa | |
| Compressed air dew point | -20 | ℃ | |
| Compressed air condition | Oil-free, free of solid impurities | ||
| Air consumption | 0.01 | M3/h | |
| Power consumption | 0.7 | KW/h | |
| Net weight | 410 | KG |
Read from the builder's published page: www.andaojx.cn, on 2026-11-07.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.andaojx.cn,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Andao
Other machines of this kind: Autowinder
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.