MS Printing Solutions Maxi-D is a festoon drier used in dyeing, finishing and printing, still in its builder’s current range. Its builder lists fabric capacity 10 to 20 linear m, electrical power installed 40 to 75 kVA and max temperature 140 °C. It carries fabric through a heated chamber in long, loosely hanging loops supported on rods, so it dries with little tension and no surface contact.
Festoon drierDyeing, finishing and printingIn the builder's current range
Key specifications
3 of 3 key figures recorded
- Make
MS Printing SolutionsItalymsitaly.com (the builder's website, opens in a new tab) All 12 machines from MS Printing Solutions - Class
- Festoon drier
- Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-7 Noise ISO 9902-7
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H5-A27 (as listed by the organiser)
Specification
| Parameter | Value | Unit | Comparable | As published |
|---|---|---|---|---|
| Serves | LaRio | The builder states which of its printers this dryer serves, which is what places it after printing rather than in finishing. | ||
| Max temperature | 140 | °C | ||
| Fabric capacity | 10 to 20 | linear m | Ten metres at three passages over two chambers, twenty at three passages over four. | |
| Electrical power installed | 40 to 75 | kVA | 32–60 kW | |
| Supply source | Natural gas, GPL, steam to 6 bar, diathermic oil at 260 °C | |||
| Thermic power installed | 344000 to 688000 | kcal/h | Published by the builder in European notation. Printed "344.000" and "688.000". |
Read from the builder's published page: msitaly.com, on 2026-08-26.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for dyeing and finishing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-7 Textile machinery — Safety requirements — Part 7: Dyeing and finishing machinery — Amendment 2
- Noise
- ISO 9902-7 Textile machinery — Noise test code — Part 7: Dyeing and finishing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- msitaly.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from MS Printing Solutions
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.