- Make
- MS Printing Solutions — Headquarter given on msitaly.com as Dover Industries Italy Srl, Via Bancora e Rimoldi 47, 22070 Guanzate (CO).
- Class
- Festoon drier
- Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value | Unit | As published |
|---|---|---|---|
| Serves | JPK EVO, LaRio | The builder states which of its printers this dryer serves, which is what places it after printing rather than in finishing. | |
| Max temperature | 180 | °C | The hottest of the range. |
| Fabric capacity | 6 to 24 | linear m | Six metres at three passages over one chamber, twenty-four at three passages over four. |
| Electrical power installed | 50 to 180 | kVA | |
| Supply source | Natural gas, GPL, steam to 6 bar, diathermic oil at 260 °C | ||
| Thermic power installed | 172000 to 688000 | kcal/h | Published by the builder in European notation. Printed "172.000" and "688.000". |
Read from the builder's published page: msitaly.com, on 2026-08-26.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from MS Printing Solutions
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.