Picanol GTMax-i 3.0S Connect is a rapier loom, still in its builder’s current range. Its builder lists width reduction 60 - 90 cm, warp beam diameter 805 - 1,000 mm and filament yarns range 20 - 3,000 den. It inserts weft with a rigid or flexible rapier, or with two rapiers that transfer the yarn mid-shed, giving positive control of the weft.
Rapier loomWeavingIn the builder's current range
Key specifications
3 of 5 key figures recorded
- Make
PicanolBelgiumpicanol.be (the builder's website, opens in a new tab) All 18 machines from Picanol - Class
- Rapier loom
- Process stage
- Weaving
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-6 Noise ISO 9902-6
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H3-E01 (as listed by the organiser)
Specification
| Parameter | Value | Comparable | As published |
|---|---|---|---|
| Usable widths | 190, 220, 230, 240, 250 and 340 cm | 190–3 400 mm | |
| Width reduction | 60 - 90 cm | ||
| Spun yarns range | Nm 200 - Nm 3 | 5–333 tex | |
| Spun yarns range (Ne) | Ne 120 - Ne 1.8 | ||
| Filament yarns range | 20 - 3,000 den | 2.22–333 tex | |
| Filament yarns range (dtex) | 22 - 3,300 dtex | ||
| Filling selection | Up to 12 | ||
| Warp beam diameter | 805 - 1,000 mm | ||
| Electrical warp stop motion contact bars (pitch) | 25 mm | 6 contact bars | |
| Electrical warp stop motion contact bars (pitch) | 16 mm | 8 contact bars | |
| Diameter of cloth roll | 600 mm | ||
| PBM - Picanol Batching Motion diameter | up to 1,500 mm | ||
| Positive Dobby harness frames | max 20 | ||
| Harness frames heddles | 13 or 15 " |
Read from the builder's published page: www.picanol.be, on 2026-10-29.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for fabric manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-6 Textile machinery — Safety requirements — Part 6: Fabric manufacturing machinery
- Noise
- ISO 9902-6 Textile machinery — Noise test code — Part 6: Fabric manufacturing machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.picanol.be,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Picanol
Other machines of this kind: Rapier loom
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.