Q-Lab Q-SUN Xe-2 is a fabric testing instrument, still in its builder’s current range. Its builder lists display languages 17 user-selectable languages. Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.
Fabric testingTesting and laboratoryIn the builder's current range
Key specifications
Specifications incomplete: 2 of 5 key figures recorded
- Test performedweathering, lightfastness, and photostability tester
- Measuring range—
- Test stations / specimen holders31
- Test standards—
- Specimen size—
- Make
- Q-LabUnited Statesq-lab.com (the builder's website, opens in a new tab) All 5 machines from Q-Lab
- Class
- Fabric testing
- Process stage
- Testing and laboratory
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Test performed | weathering, lightfastness, and photostability tester |
| Lamps | one lamp per machine |
| Lamp life | 3000 hours at normal irradiance and 1000 hours at high irradiance |
| Black panel temperature range | between 35 °C and 105 °C |
| Specimen capacity | 31 specimens of 45 × 132 mm (1.8 × 5.2 in) each |
| Irradiance control | 340 nm, 420 nm, or TUV (Total UV, 300-400 nm) |
| Display languages | 17 user-selectable languages |
Read from the builder's published page: www.q-lab.com, on 2026-11-16.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.q-lab.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Q-Lab
Other machines of this kind: Fabric testing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.