- Make
- Sperotto Rimar — Wool and fabric finishing. Part of the Santex Rimar group.
- Class
- Decatising and crabbing
- Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
Specification
| Parameter | Value |
|---|---|
| Working width | 180 – 220 cm |
| Mechanical speed | 4 – 40 m/min. |
| Working speed | 4 – 40 m/min. |
| Absorbed load | 55 kW |
| Saturated steam pressure | 6 bar |
| Compressed air feed pressure | 6 bar |
| Noise level | <79 dB(A) |
| Machine weight (approx.) | 10 T |
| Maximum room required (approx.) | 650x850x330 cm |
Read from the builder's published page: www.santexrimar.com, on 2026-08-31.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from Sperotto Rimar
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.