SPGPrints Tulip is a digital textile printer, still in its builder’s current range. Its builder lists annual production capacity 750,000 linear meters, printing speed 329 m 2 /h and fabric width 1.900 mm. It applies dye or pigment ink to fabric through inkjet print heads, building the design directly from a digital file without screens.
Digital textile printingDyeing, finishing and printingIn the builder's current range
Key specifications
3 of 4 key figures recorded
- Make
SPGPrintsNetherlandsspgprints.com (the builder's website, opens in a new tab) All 9 machines from SPGPrints - Process stage
- Dyeing, finishing and printing
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H5-D32 (as listed by the organiser)
Specification
| Parameter | Value | Comparable | As published |
|---|---|---|---|
| Fabric width | 1.900 mm | ||
| Print head count | 16 print head | 16 print head version | |
| Print heads | 16 print heads | ||
| Print Head Gap | 3-4 mm | ||
| Printing Width | 1900 mm | ||
| Print Resolution | 2400 dpi | ||
| Drop Size | 5-18 picolitre | ||
| Printing Speed | 329 m 2 /h | 2 m²/h | |
| Dryer Passes | 1 pass | ||
| Annual Production Capacity | 750,000 linear meters |
Read from the builder's published page: www.spgprints.com, on 2026-10-29.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.spgprints.com,
- Archived copy
- snapshot, captured 2026-05-16
- Checked by
- Textile School,
- Last changed
Related machines
Also from SPGPrints
Other machines of this kind: Digital textile printing
Elsewhere in Dyeing, finishing and printing
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.