Home » Machinery specifications » Taber Industries 5820 Webbing Abrasion Tester

Taber Industries 5820 Webbing Abrasion Tester

Checked by an editor

Taber Industries 5820 Webbing Abrasion Tester is a fabric testing instrument, still in its builder’s current range. Its builder lists maximum stroke length 305mm (12 inch), standard weight set 2, 4 & 5.2 lbs. and specimen angle to hex bar 85° (±2°). Fabric testing instruments measure fabric properties such as tensile and tear strength, abrasion and pilling resistance, colour fastness, dimensional stability and air permeability.

Fabric testingTesting and laboratoryIn the builder's current range

Key specifications

Specifications incomplete: 1 of 5 key figures recorded

Specification

ParameterValue
Test performedAbrasion resistance of seat belts and webbing
Specimen angle to hex bar85° (±2°)
Number of specimensup to three
Maximum stroke length305mm (12 inch)
Speeds15, 30, 37, 45, and 60 cycles per minute
Standard weight set2, 4 & 5.2 lbs.
Optional weight set3 & 5 lbs.
Breaking strength capacityover 13,500 N

Read from the builder's published page: www.taberindustries.com, on 2026-11-16.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.taberindustries.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device