Home » Standards » ISO » Page 34

Standards crosswalk

ISO

ISO appears on 1,355 crosswalks here — as the issuing body, or as an equivalent to another body's standard.

Any body’s number. It lands on the crosswalk that covers it, whichever body issued it.

Every issuing body

Showing 331–340 of 1,355 Show the whole register

International Organization for Standardization

The international consensus standard, and usually the one a crosswalk is filed under. Textile test methods sit in technical committee TC 38.

International Official site

What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?

Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.

ISO 6741-1

Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 1: Mass determination and calculations

Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 1: Mass determination and calculations

  • 4 calculators

ISO 6976

Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition

Natural gas — Calculation of calorific values, density, relative density and Wobbe indices from composition

  • 1 calculator

ISO 7211-2

Textiles — Woven fabrics — Construction — Methods of analysis — Part 2: Determination of number of threads per unit length

Counting ends and picks per unit length — the construction figure that sits beside GSM on every woven fabric specification.

  • ASTM · CEN
  • NEQ
  • IDT
  • 7 calculators
  • AATCC, BIS, SAC, JIS, EN, DIN not yet checked

ISO 7211-3

Textiles — Woven fabrics — Construction — Methods of analysis — Part 3: Determination of crimp of yarn in fabric

How much longer a yarn is than the fabric it came out of, because it bends over the yarns crossing it. Measured by straightening a removed yarn under…

  • ASTM
  • NEQ
  • 5 calculators
  • AATCC, BIS, SAC, JIS, EN, DIN not yet checked

ISO 7870-1

Control charts — Part 1: General guidelines

Control charts — Part 1: General guidelines

  • 1 calculator

ISO 7870-2

Control charts — Part 2: Shewhart control charts

Control charts — Part 2: Shewhart control charts

  • 1 calculator

ISO 7887

Water quality — Examination and determination of colour

Water quality — Examination and determination of colour

  • 2 calculators

ISO 7979

Leather — Tests for colour fastness — Colour fastness to hydroalcoholic mixtures

Leather — Tests for colour fastness — Colour fastness to hydroalcoholic mixtures

  • CEN
  • IDT

ISO 8115

Cotton bales — Dimensions and density

The agreed sizes and densities a cotton bale comes in — universal density, gin standard, and the rest.

  • 4 calculators
  • ASTM, AATCC, BIS, SAC, JIS, EN, DIN not yet checked

ISO 8115-2

Bales — Part 2: Bales of man-made staple fibres — Dimensions

The second part of the bale dimensions series, covering bales of man-made staple fibre where part 1 covers cotton. ISO withdrew it in 1994, the same year it…

Scroll to Top