ISO 11643
Leather — Tests for colour fastness — Colour fastness of small samples to solvents
Leather — Tests for colour fastness — Colour fastness of small samples to solvents
Reference register
Textile standards crosswalk: ISO, ASTM, AATCC and BIS
3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 2,201–2,210 of 3,037
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ISO 11675
Textile machinery — Flatbed knitting machines — Vocabulary
Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.
ISO 11676:2014
Textile machinery and accessories -- Pattern disks and pattern chains for warp knitting machines -- Vocabulary and symbols
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 11677-1:1994
Textile machinery and accessories — Main dimensions of flat steel healds with open end loops — Part 1: C-shaped end loops
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 11677-2:1994
Textile machinery and accessories — Main dimensions of flat steel healds with open end loops — Part 2: J-shaped end loops
Classified under ICS 59, the international subject classification for textile and leather technology.
ISO 11677-3
Textile machinery and accessories — Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods — Part 3: Carrying rods for healds with C- and J-shaped end loops
Part of a multi-part series this register already held parts of. Added to complete the sequence, because a series read in fragments describes a method without the requirements…
ISO 1172
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination
Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content using calcination
ISO 11721-1
Textiles — Determination of resistance of cellulose-containing textiles to micro-organisms — Soil burial test — Part 1: Assessment of rot-retardant finishing
Textiles — Determination of resistance of cellulose-containing textiles to micro-organisms — Soil burial test — Part 1: Assessment of rot-retardant finishing
ISO 11721-2
Textiles — Determination of the resistance of cellulose-containing textiles to micro-organisms — Soil burial test — Part 2: Identification of long-term resistance of a rot retardant finish
Textiles — Determination of the resistance of cellulose-containing textiles to micro-organisms — Soil burial test — Part 2: Identification of long-term resistance of a rot retardant finish