Reference register
3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 2,661–2,670 of 3,037
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
Protective gloves against dangerous chemicals and micro-organisms — Part 5: Terminology and performance requirements for micro-organisms risks
Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
Fishing nets — Determination of elongation of netting yarns
Fishing nets — Determination of elongation of netting yarns
Withdrawal of ISO 3914-1976
This is not a standard. It is ISO's catalogue entry recording that the standard of this number was WITHDRAWN, and the title above is that notice rather than…
Textile machinery and accessories — Cylindrical tubes — Part 1: Recommended main dimensions
Classified under ICS 59, the international subject classification for textile and leather technology.
Textile machinery — Cylindrical tubes — Part 2: Tubes for open-end spinning machines
Textile machinery — Cylindrical tubes — Part 2: Tubes for open-end spinning machines
Textile machinery and accessories — Cylindrical tubes — Part 3: Tubes for tape yarns
Textile machinery and accessories — Cylindrical tubes — Part 3: Tubes for tape yarns
Textile machinery and accessories — Cylindrical tubes — Part 4: Tubes for textured yarns
Textile machinery and accessories — Cylindrical tubes — Part 4: Tubes for textured yarns
Textile machinery and accessories — Cylindrical tubes — Part 5: Dimensions, tolerances and designation of tubes for continuous spin-drawn synthetic filament yarns
Classified under ICS 59, the international subject classification for textile and leather technology.
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
1,481 machines in the register.Tell us about a missing one 302 event series in the register.Submit a trade fair or conference 3,037 standards tracked in the register.Get the changes by email each week