Home » Standards » Page 283

Reference register

Textile standards crosswalk: ISO, ASTM, AATCC and BIS

3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.

Any body’s number. It lands on the crosswalk that covers it, whichever body issued it.

Every issuing body

AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)

Showing 2,821–2,830 of 3,037

What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?

Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.

ISO 8230-2

Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene

Safety requirements for dry-cleaning machines — Part 2: Machines using perchloroethylene

ISO 8230-3

Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents

Safety requirements for dry-cleaning machines — Part 3: Machines using combustible solvents

ISO 8232

Closed-circuit dry-cleaning machines — Defining and checking of machine characteristics

Closed-circuit dry-cleaning machines — Defining and checking of machine characteristics

ISO 8239

Sewing machines needles — Fitting dimensions — Tolerances and combinations

Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.

ISO 8489-1:1995

Textile machinery and accessories — Cones for cross winding — Part 1: Recommended main dimensions

Classified under ICS 59, the international subject classification for textile and leather technology.

ISO 8489-2

Textile machinery and accessories — Cones for cross winding — Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30'

Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.

ISO 8489-3

Textile machinery and accessories — Cones for cross winding — Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20'

Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.

ISO 8489-4:1995

Textile machinery and accessories — Cones for cross winding — Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes

Classified under ICS 59, the international subject classification for textile and leather technology.

ISO 8489-5

Textile machinery and accessories — Cones for cross winding — Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57'

Classified under ICS 59 or 61, the international subject classifications for textile technology and the clothing industry.

ISO 8516

Textile glass — Textured yarns — Basis for a specification

Textile glass — Textured yarns — Basis for a specification

Scroll to Top