ASTM D2258/D2258M
Standard Practice for Sampling Yarn for Testing
Standard Practice for Sampling Yarn for Testing
Reference register
Textile standards crosswalk: ISO, ASTM, AATCC and BIS
3,037 test methods indexed by number across ISO, ASTM, AATCC, BIS, GB, JIS and EN, 503 of them with a full record. Where an equivalent is known it is stated as IDT, MOD or NEQ, with the deviation declared wherever it is MOD.
Every issuing body
AATCC (5) · amfori (1) · AS/NZS (62) · ASTM (528) · Better Cotton (2) · BIS (234) · bluesign (4) · BS (208) · C2C (3) · CEN (410) · DD (1) · EN (1) · Fairtrade (1) · GOTS (6) · Higg Index (5) · IEC (7) · ISEAL (4) · ISO (1,355) · ISO/IEC (7) · ISO/TR (2) · ISO/TS (3) · LWG (4) · NZS (6) · OEKO-TEX (8) · PAS (1) · PD (4) · SA8000 (1) · SAC (458) · SLCP (1) · Textile Exchange (9) · WRAP (1) · ZDHC (6)
Showing 601–610 of 3,037
What are ISO, ASTM and AATCC — and what do IDT, MOD and NEQ mean?
Calculators on this site cite 35 further standards that the register does not cover yet. They are being written in order of how many tools need them.
ASTM D2261
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2343
Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
Classified under ICS 59, the international subject classification for textile and leather technology.
ASTM D2408
Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Amino-Silane-Type Finishes, for Plastic Laminate
Found by measuring this register against the ICS 59 catalogue, where ASTM coverage turned out to be 94% and this was one of the eleven gaps.
ASTM D2410
Test Method for Finish Content of Woven Glass Fabric, Cleaned and After-Finished with Chrome Complexes, for Plastic Laminates (Withdra
Found by measuring this register against the ICS 59 catalogue, where ASTM coverage turned out to be 94% and this was one of the eleven gaps.
ASTM D2462
Standard Test Method for Moisture in Wool by Distillation With Toluene
Standard Test Method for Moisture in Wool by Distillation With Toluene
ASTM D2497
Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
Standard Tolerances for Manufactured Organic-Base Filament Single Yarns
ASTM D2524
Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18 in. (3.2 mm) Gage Length
Standard Test Method for Breaking Tenacity of Wool Fibers, Flat Bundle Method— 18 in. (3.2 mm) Gage Length