Jump to a calculator 671 tools
Warping & Sizing
Sizing Recipe Cost Estimator
PVA usually dominates size cost well out of proportion to its share of solids. This shows by how much.
Batch Cost
—
Total chemical cost for the size box charge
Cost Breakdown
- Total Size Solids
- — kg
- Cost per Litre of Liquor
- —
- Cost per kg of Solids
- —
- Solids Concentration
- — %
Cost Split
—% starch —% PVA + lubricant
Recovering and reusing PVA changes this arithmetic entirely. Price the recipe again once a recovery plant is in the loop.
Using this calculator
About the Sizing Recipe Cost Estimator
The formula
This is the expression the tool evaluates. Every term is named underneath, with the unit it must be supplied in.
batchCost = f( liquorVolume, starchConc, pvaConc, lubricantConc, starchPrice, pvaPrice, lubricantPrice )Each input feeds the expression evaluated in the browser; the symbol table below names every term and its unit.
| Symbol | Stands for | Unit |
|---|---|---|
liquorVolume | Batch Volume | L |
starchConc | Starch | g/L |
pvaConc | PVA | g/L |
lubricantConc | Lubricant / Wax | g/L |
starchPrice | Starch Price | /kg |
pvaPrice | PVA Price | /kg |
lubricantPrice | Lubricant Price | /kg |
batchCost | Batch Cost | — |
totalSolids | Total Size Solids | kg |
costPerLitre | Cost per Litre of Liquor | — |
costPerKgSolids | Cost per kg of Solids | — |
solidsConcentration | Solids Concentration | % |
How the result is derived
Step by step, from the values you type to the figure on screen.
- The 7 inputs are read from the form on every keystroke: Batch Volume, Starch, PVA, Lubricant / Wax, Starch Price, PVA Price and Lubricant Price.
- Each value is checked against the accepted range in the input table below. A value outside its range stops the calculation rather than producing a misleading figure — the results blank out and a message appears.
- The validated values are substituted into the expression above, which resolves Batch Cost together with every supporting figure in one pass — no value is carried over from a previous entry.
- The supporting outputs — Total Size Solids, Cost per Litre of Liquor, Cost per kg of Solids and Solids Concentration — come from the same pass, so they always describe the same case as the headline figure.
- Results are rounded for display only. The full-precision value is used throughout the chain, so reading a rounded intermediate figure back into the tool by hand can shift the last digit.
What each input means
Where to read each value on the floor, the unit it must be in, and the range the tool accepts.
| Input | Unit | Accepted range | Default | What it means |
|---|---|---|---|---|
| Batch Volume | L | 10 to 20000 L | 1000 | |
| Starch | g/L | 0 to 300 g/L | 80 | |
| PVA | g/L | 0 to 300 g/L | 20 | |
| Lubricant / Wax | g/L | 0 to 100 g/L | 5 | |
| Starch Price | /kg | 0 to 1000 /kg | 0.9 | |
| PVA Price | /kg | 0 to 1000 /kg | 2.2 | |
| Lubricant Price | /kg | 0 to 1000 /kg | 3.5 |
What the tool returns
The headline figure and every supporting value it is built from.
| Output | Unit | What it tells you |
|---|---|---|
| Batch Cost (headline result) | — | Total chemical cost for the size box charge |
| Total Size Solids | kg | |
| Cost per Litre of Liquor | — | |
| Cost per kg of Solids | — | |
| Solids Concentration | % |
Worked example
Given
- Batch Volume
- 1000 L
- Starch
- 80 g/L
- PVA
- 20 g/L
- Lubricant / Wax
- 5 g/L
- Starch Price
- 0.9 /kg
- PVA Price
- 2.2 /kg
- Lubricant Price
- 3.5 /kg
The tool loads with this case already solved — the Batch Cost shown above is its answer. Change one value and the difference from this baseline is the sensitivity of the result to that variable.
How to use it
- Work through the input groups in order — Liquor, Concentrations and Unit Prices. The defaults are a realistic case, so you can change one value at a time and watch what moves.
- There is no calculate button. Every figure recalculates as you type or drag, which is what makes this usable for a what-if sweep rather than a single answer.
- Read Batch Cost in the dark results panel — that is the headline figure, expressed in the unit shown.
- Check the supporting rows underneath (Total Size Solids, Cost per Litre of Liquor, Cost per kg of Solids and Solids Concentration) before acting on the headline — they are where an implausible input usually shows itself first.
- Reset to defaults returns every field to the reference case, which is the quickest way to check whether a surprising result came from the tool or from an input you had changed earlier.
Where this is used
- Process planning — establishing Batch Cost before a trial is booked, so machine time and material in Warping & Sizing are committed against a calculated figure rather than an estimate.
- Costing and quotation — Batch Cost is an input to the cost sheet, and quoting from a worked number rather than a remembered one is what keeps a margin intact.
- Troubleshooting — when the floor result drifts from plan, entering the measured values (starting with Batch Volume) shows how much of the gap in Batch Cost each variable explains.
- Teaching and study — the accepted ranges bracket normal Warping & Sizing practice, so moving one variable at a time shows the shape of the relationship rather than a single answer.
Assumptions and limits
- Recovering and reusing PVA changes this arithmetic entirely. Price the recipe again once a recovery plant is in the loop.
- Every input is bounded to the range normal practice occupies (Batch Volume 10 to 20000 L, Starch 0 to 300 g/L and PVA 0 to 300 g/L, and so on for the rest). Those bounds are guard rails against typing errors, not a claim that the formula fails one unit outside them.
- The calculation is deterministic: the same inputs always give the same result. It carries no allowance for machine condition, operator skill, ambient conditions or lot-to-lot material variation unless an input above explicitly represents one.
- Nothing is sent anywhere. The maths runs in your browser, so the numbers you type never leave the page.
Questions people ask
What do I need to know before using the Sizing Recipe Cost Estimator?
Have these to hand: Batch Volume, Starch, PVA, Lubricant / Wax, Starch Price, PVA Price and Lubricant Price. With those entered, the tool returns Batch Cost immediately.
What exactly is Batch Cost?
Total chemical cost for the size box charge. It is derived from Batch Volume, Starch, PVA, Lubricant / Wax, Starch Price, PVA Price and Lubricant Price, and is the figure the rest of the Warping & Sizing calculation is built around.
Which units does this calculator expect?
Enter Batch Volume in L, Starch in g/L, PVA in g/L, Lubricant / Wax in g/L, Starch Price in /kg, PVA Price in /kg and Lubricant Price in /kg. Mixing unit systems is the most common cause of a result that looks an order of magnitude wrong — convert before typing, not after reading.
What are the other figures under the main result?
They are the intermediate quantities the calculation passes through: Total Size Solids, Cost per Litre of Liquor, Cost per kg of Solids and Solids Concentration. They are shown because a headline number nobody can trace is a number nobody trusts — checking them against your own expectation is the fastest way to confirm the inputs were read as you intended.
Can I rely on this for a production decision?
Recovering and reusing PVA changes this arithmetic entirely. Price the recipe again once a recovery plant is in the loop. Treat the output as an engineering estimate that narrows the trial window, not as a substitute for the trial.
Convert this result
Reference rate of 2026-11-20, published by the European Central Bank. Source
A reference rate is not a dealing rate. Banks and payment providers apply their own spread, so treat this as the mid-market figure a quotation is negotiated around rather than the money that will arrive.