Finishing & Environment
Scales abrasive removal with grit number and contact intensity to give mass loss per pass and over a sequence, the finished GSM, the strength penalty that runs ahead of the weight loss, and the fibre being converted to dust every hour.
Calculator
Finishing & Environment
Converts recovered colony counts into percentage and log reduction against the specification, shows the count a target log reduction actually demands, and carries the applied dose through wash retention to the initial loading a durable claim requires.
Calculator
Finishing & Environment
Runs the stenter mass balance both ways: entry width, chain width, overfeed and finish add-on into the exit GSM they produce, and a target GSM back into the overfeed it demands – with the error against the current setting.
Calculator
Finishing & Environment
Converts a validated heat-setting reference of temperature and dwell into the equivalent dwell at any other temperature through the Arrhenius rate ratio, then into the line speed and production that temperature allows, with the degrees needed to buy a ten per cent speed change.
Calculator
Coating, Lamination & Advanced Finishing
Calculates reactive hot melt PUR application rate from dot diameter, height and density: adhesive add-on per square metre, the surface coverage that bond strength costs in breathability, open area retained and hourly adhesive consumption.
Calculator
Finishing & Environment
Calculates the expansion ratio and void fraction of a foamed polyurethane sponge layer, the areal weight it delivers at a given thickness, and the polymer saved against an unfoamed layer of the same build.
Calculator
Finishing & Environment
Plans a PVC plastisol coating build: fused film weight per pass from blade gap and density, coats needed to reach a target tarpaulin weight, the finished film thickness, and whether the fusion oven delivers enough dwell at line speed.
Calculator
Coating, Lamination & Advanced Finishing
Converts knife gap, gap factor, coating density and solids content into wet film thickness and dry add-on weight, with the shear rate and shear stress under the knife and hourly coating consumption.
Calculator
Finishing & Environment
Relates high-frequency welder settings to seam performance: energy density from power, dwell and electrode area, the peel strength it develops, how close that comes to the base fabric ceiling, and the settings needed to reach it.
Calculator
Every record in these registers was sent in by somebody. Submissions are reviewed before they are published.
3,388 machines in the register.Tell us about a missing one 795 event series in the register.Submit a trade fair or conference 3,047 standards tracked in the register.Get the changes by email each week