CMT Hicorp Machinery HCP2030 is a roving frame used in spinning, still in its builder’s current range. A roving frame, or simplex, drafts finisher drawn sliver into a thinner strand called roving, inserts a small protective twist with a flyer and winds the roving onto bobbins. It sits between the finisher draw frame and the ring spinning frame, and is not needed for rotor or air-jet spinning, which take sliver directly.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
All 4 machines from CMT Hicorp Machinery →
Read from the builder's published page: www.cmthicorp.com, on 2026-11-02.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
Related machines
Also from CMT Hicorp Machinery
Other machines of this kind: Roving frame (simplex)
Elsewhere in Spinning
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.