Rieter F 37 is a roving frame used in spinning, still in its builder’s current range. Its builder lists max. flyer speed mechanical up to 1 500 rpm, gauge 110 and machine width f 37. A roving frame, or simplex, drafts finisher drawn sliver into a thinner strand called roving, inserts a small protective twist with a flyer and winds the roving onto bobbins.
Roving frame (simplex)SpinningIn the builder's current range
Key specifications
4 of 4 key figures recorded
- Make
RieterSwitzerlandrieter.com (the builder's website, opens in a new tab) All 68 machines from Rieter - Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-2 Noise ISO 9902-2
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Roving count | 1250 – 200 tex; Ne 0.47 – Ne 2.95; | |
| Twist range roving | 5 – 90 T/m | |
| Draft range Mechanical | 4 – 13-fold | 1:4–1:13 |
| Gauge | 110 | |
| Number of spindles | 60, 76, 92, 108, 124, 140, 156, 172, 188, | |
| Bobbin diameter | 6" (152 mm) | 152 mm |
| Winding height bobbin | 16" (406 mm) | 406 mm |
| Can diameter | 20" (500 mm) and 24" (600 mm) | 508–610 mm |
| Max. number of spindles | 220 | |
| Max. flyer speed mechanical | up to 1 500 rpm, technologically | |
| Flyer drive | 6 – 18 kW | |
| Bobbin drive | 6 – 27 kW | |
| Drafting system drive | 3 – 5.5 kW | |
| Suction (optional) | 3 – 6.5 kW | |
| Bobbin rail movement | 0.37 kW | |
| Other drives including doffing | 3.75 – 5.9 kW | |
| Compressed air – min. pressure | 7 bar | |
| Machine length F | 37 | |
| Sections | 4 5 6 7 8 9 10 11 12 13 14 | |
| Length L (mm) | 8 940 10 700 12 460 14 220 15 980 17 740 19 500 21 260 23 020 24 780 26 540 | |
| Machine width F | 37 |
Read from the builder's published page: www.rieter.com, on 2026-08-22.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for spinning preparatory and spinning machines. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-2 Textile machinery — Safety requirements — Part 2: Spinning preparatory and spinning machines — Amendment 1
- Noise
- ISO 9902-2 Textile machinery — Noise test code — Part 2: Spinning preparatory and spinning machinery
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.rieter.com,
- Archived copy
- snapshot, captured 2026-08-22
- Checked by
- Textile School,
- Last changed
Related machines
Other machines of this kind: Roving frame (simplex)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.