Barmag VarioFil is a man-made filament spinning line, still in its builder’s current range. Its builder lists production capacity up to 170 kg/h and titre range 40 - 600 den. It melts polymer chips, extrudes the melt through spinnerets, cools the filaments with quench air and winds them, either partially oriented (POY) for later draw texturing or fully drawn (FDY) for direct use in weaving and knitting.
Man-made filament spinning (POY/FDY)SpinningIn the builder's current range
Key specifications
Specifications incomplete: 2 of 4 key figures recorded
- Production (max.)170 kg/h
- Yarn titre range4.44–66.7 tex
- Winding speed (max.)—
- Spinning positions—
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-B09 (as listed by the organiser)
Specification
| Parameter | Value | Unit | Comparable | As published |
|---|---|---|---|---|
| Production capacity | up to 170 | kg/h | Stated per extruder. | |
| Titre range | 40 - 600 | den | 4.44–66.7 tex |
Read from the builder's published page: www.barmag.com, on 2026-08-25.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.barmag.com,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Barmag
Other machines of this kind: Man-made filament spinning (POY/FDY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.