Comoli Fermo M300 is a man-made filament spinning line, still in its builder’s current range. It melts polymer chips, extrudes the melt through spinnerets, cools the filaments with quench air and winds them, either partially oriented (POY) for later draw texturing or fully drawn (FDY) for direct use in weaving and knitting. It is the start of the synthetic yarn chain, feeding draw texturing machines in the POY case.
Checked against the builder's page. On 2026-11-19 an automated check found this model named on the builder's page, www.comolifermo.com. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Man-made filament spinning (POY/FDY)SpinningIn the builder's current range
Key specifications
Specifications incomplete: 0 of 4 key figures recorded
- Production (max.)—
- Yarn titre range—
- Winding speed (max.)—
- Spinning positions—
Read from the builder's published page: www.comolifermo.com, on 2026-11-17.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.comolifermo.com,
- Last changed
Related machines
Also from Comoli Fermo
Other machines of this kind: Man-made filament spinning (POY/FDY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.