Dongxing DX310B is a draw texturing machine used in spinning, still in its builder’s current range. Its builder lists maximum winding capacity 1.5KG, Φ200152, spindle gauge 225mm and total drive power 22KW. It takes partially oriented filament yarn, draws it and passes it through a heater and false-twist unit to give bulk and stretch, producing textured yarn (DTY) wound onto packages.
Draw texturing (DTY)SpinningIn the builder's current range
Key specifications
3 of 4 key figures recorded
- Make
DongxingChinazjdxfj.cn (the builder's website, opens in a new tab) - Class
- Draw texturing (DTY)
- Process stage
- Spinning
- Lifecycle
- In the builder's current range
- Standards
- Safety ISO 11111-4 Noise ISO 9902-4
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H7-C41 (as listed by the organiser)
Specification
| Parameter | Value | Comparable |
|---|---|---|
| Spindle count (锭数) | Base 192 spindles, in multiples of 16 | |
| Spindle gauge (锭距) | 225mm | |
| Twist direction (捻向) | S or Z twist (S捻或Z捻) | |
| Maximum winding capacity (最大卷绕容量) | 1.5KG, Φ200*152 | |
| Unwinding package specification (退解筒子规格) | Φ110xΦ42xΦ320 | |
| Take-up package specification (卷取筒子规格) | Φ69xΦ57x170 | |
| Winding angle (卷绕角) | 20–40, freely adjustable | |
| Tension control (张力控制) | Multi-stage tension beads used together with tension rings (多段式张力珠和张力圈并用) | |
| Application range (适用范围) | 30–400 D polyester filament yarn | 3.33–44.4 tex |
| Total drive power (总动力装置功率) | 22KW | |
| Electric heating power (电热功率) | 15KW | |
| Operating temperature (工作温度) | 140℃~250℃ | |
| Heater yarn-path length (热箱过丝长度) | 400mm | |
| False-twist rotor maximum speed (假捻器转子最高速度) | 150000RPM | |
| Operating environment requirement (工作环境要求) | Relative humidity ≤85 %; temperature ≤30 % (as published) |
Read from the builder's published page: zjdxfj.cn, on 2026-08-31.
Standards that apply to this class
Machines of this class fall under the textile machinery standards for yarn processing, cordage and rope manufacturing machinery. The common requirements of ISO 11111-1 apply to every machine in this family.
- Safety
- ISO 11111-4 Textile machinery — Safety requirements — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
- Noise
- ISO 9902-4 Textile machinery — Noise test code — Part 4: Yarn processing, cordage and rope manufacturing machinery — Amendment 2
These standards cover the class of machine, not this model. A machine's own declaration of conformity says which editions it was built to.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- zjdxfj.cn,
- Checked by
- Textile School,
- Last changed
Related machines
Also from Dongxing
Other machines of this kind: Draw texturing (DTY)
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.