Home » Machinery specifications » Dornier PROTOS TW

Dornier PROTOS TW

Checked by an editor

Dornier PROTOS TW is a tape or 3D weaving machine used in composites manufacture, still in its builder’s current range. Its builder lists machine speed Up to 100 picks per minute and maximum nominal width Up to 320 cm. Tape and 3D weaving machines weave reinforcing fibres for composites, either spread tapes woven into flat fabrics or multilayer and three-dimensional structures with binder yarns running through the thickness.

Tape and 3D weavingCompositesIn the builder's current range

Specification

ParameterValue
Maximum nominal widthUp to 320 cm
Machine speedUp to 100 picks per minute
Weft material widthup to 25 mm

Read from the builder's published page: www.lindauerdornier.com, on 2026-10-29.

Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.

The record

Read from
www.lindauerdornier.com,
Checked by
Textile School,
Last changed

All machinery specifications

Related machines

Other machines of this kind: Tape and 3D weaving

Report incorrect information on this page

Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.

Scroll to Top

Follow on WhatsApp

Scan with your phone’s camera to open the channel, then tap Follow.

QR code for the WhatsApp channelOr open WhatsApp on this device