Tsudakoma TAL is a fibre placement and lay-up machine used in composites manufacture, still in its builder’s current range. Automated fibre placement and lay-up machines lay narrow tapes or tows of prepreg or dry fibre onto a tool, course by course, under a heated compaction head, building a laminate with the required fibre orientations. They follow tape production and precede curing or consolidation, replacing hand lay-up for large and complex parts.
Checked against the builder's page. On 2026-11-06 an automated check found this model named on the builder's page, www.tsudakoma.co.jp. No editor has reviewed this record.
Identity only — no specification recorded yet. This make and model are known to exist and to be traded, which is more than a superseded machine's own builder will usually tell you. Its specification is not recorded here, so this page identifies the machine and claims nothing about what it does.
Automated fibre placement and lay-upCompositesIn the builder's current range
Key specifications
Specifications incomplete: 0 of 3 key figures recorded
- Tape or tow width—
- Tows per head—
- Lay-up speed (max.)—
- Make
- TsudakomaJapantsudakoma.co.jp (the builder's website, opens in a new tab) All 11 machines from Tsudakoma
- Process stage
- Composites
- Lifecycle
- In the builder's current range
- See it
- Exhibited at ITMA ASIA + CITME 2024, Shanghai, stand H3-A64 (as listed by the organiser)
Read from the builder's published page: www.tsudakoma.co.jp, on 2026-08-30.
Check against the machine before you buy or budget on it. Builders publish a range and a configuration; the machine on your floor may be a different variant, may have been rebuilt, and may not carry the options these figures assume. This register records what the builder published, not what any individual machine does.
The record
- Read from
- www.tsudakoma.co.jp,
- Last changed
Related machines
Also from Tsudakoma
Report incorrect information on this page
Tell us what is wrong and we will check it against the source. Reports are private, are never published, and go to an editor rather than into a comment thread.